Steel Pipes Knowledge steel-pipes-knowledge

Your position:Home > Steel Pipes Knowledge > Better connection methods for hot-dip galvanized steel pipe

Feed and Linkedin page

Better connection methods for hot-dip galvanized steel pipe

We know that the production of hot dipped galvanized steel pipe can be customized according to the needs of customers. But considering the transportation and processing of hot dipped galvanized steel pipe, it is impossible to make the length of hot-dip galvanized steel tube too long. After searching the internet, we find that pipe price and pipe size vary and the longer the length of hot-dip galvanized steel pipe, the more expensive it will be. There will be a question to us how to choose the length of steel pipe. As you know, transportation conditions are quite complicated for a long distance journey, so we can choose convey it by stages to achieve our purpose. After researching, we found that the following better connection ways are suitable for periodic transportation.

hot dipped galvanized steel pipe

The first one is welding connection. The method of welding joint is to use the physical method to weld the two sections of steel tube such as cold rolled steel pipe with argon. For industrial equipment installation nowadays, relevant downstream companies are responsible for welding installation. So do you know the downstream industries of galvanized steel pipes? It main includes welding joint installation of hot galvanized steel pipe, galvanized steel tube plating and so on. It is because of the existence of the downstream industry of these galvanized steel pipes that welded steel pipes are more specialized and safe. So we need to foster a good cooperation with these downstream companies that can bolster attempts of steel pipe manufacturers to long-term development.

Another connection method is clamp groove. This method is generally used in the transmission of short distance material. The advantages are simple processing and low cost, while the disadvantage is that the professional personnel should be arranged to check the seals regularly to ensure the safety of the transportation materials. This requires a high standard for staff involved in this pipe industry. Of course, flange connection is another important method, which is mainly used in the valve joint of hot-dip galvanized steel pipe or pre galvanized steel rectangular and square tube. In the flange connection, the first step is to flange into hot melt, then quickly fit the flange to connect steel pipe in two places, waiting for a few minutes for a closely connection and integration. Actually, connection knowledge is very important for us to learn. If you want to know more in detail, you can email us or leave messages below.

Tel: +86 18202256900 Email:

Leave a message: